Dirt Bike is Hard to Kick Start

If you’ve ever tried to kick start a dirt bike, you know it’s not easy. It takes a lot of strength and coordination to get the bike started. If you’re not prepared for it, you’ll end up exhausted and frustrated.

Here are some tips to help you kick start your dirt bike with ease.

It’s no secret that dirt bikes can be tough to start. Whether you’re new to the sport or a seasoned veteran, there’s always a chance that your bike will give you some trouble when you go to kick it over. There are a few things that can cause this, but the most common culprit is usually a dirty or fouled spark plug.

When this happens, it prevents the spark from igniting the fuel and air mixture in the engine, making it very difficult (or even impossible) to get the bike started. If your dirt bike is giving you some trouble when you try to start it, here are a few tips to help you out: – Make sure the spark plug is clean and free of any debris or build-up.

A quick wipe with a rag should do the trick. – Check your fuel level and make sure there’s enough gas in the tank. You might also want to add some fresh gas if it’s been sitting for awhile.

– If possible, try starting the bike in gear rather than in neutral. This will help get things moving more smoothly once the engine finally fires up. Hopefully these tips will help you get your dirt bike started without too much hassle!

Dirt Bike is Hard to Kick Start

Credit: www.youtube.com

How Can I Make My Dirt Bike Kickstart Easier?

There are a few things you can do to make your dirt bike kickstart easier. First, make sure the spark plug is clean and in good condition. Second, check that the air filter is clean and not restricting airflow.

Third, check the fuel level and add fresh fuel if needed. Fourth, check for any engine oil leaks and repair them if necessary. Fifth, if the engine is cold, try pre-warming it with a heat gun or hair dryer.

Finally, if all else fails, take your bike to a qualified mechanic for further diagnosis and repairs.

How Can I Make My Kick Start Easier?

If your motorcycle has a kick start, you may find it difficult to get the engine started, especially if the battery is weak or dead. There are a few things you can do to make it easier. First, make sure the bike is in neutral.

If it’s in gear, it will be much harder to start. Second, if your bike has a decompression lever, use it to release some of the pressure on the piston before you kickstart. This will make it easier for the engine to turn over.

Finally, don’t be afraid to give a good hard kick. It takes some practice to get the feel for how hard to kick, but once you do, starting should be no problem.

Why Does My Dirt Bike Only Start When I Bump Start It?

If your dirt bike only starts when you bump start it, there are a few possible reasons. One possibility is that the carburetor is not getting enough fuel. This can be caused by a dirty air filter or a fuel line that is clogged.

Another possibility is that the spark plug is fouled and needs to be replaced. Finally, the battery may be weak and needs to be recharged or replaced.

How Many Kicks Should It Take to Start a Dirt Bike?

Assuming you are talking about a four-stroke engine, it should take anywhere from three to five kicks. If the bike has been sitting for awhile, it may take a few more. Two-stroke engines are typically easier to start and only require two or three kicks.

How to start a Dirt Bike EASY! Start First Kick Everytime

4 Stroke Dirt Bike Hard to Start

If you’re having trouble getting your four stroke dirt bike started, there are a few things you can check. First, make sure that you have enough fuel in the tank. If the tank is empty, or nearly empty, the engine may not have enough power to turn over.

Also, check the oil level and be sure that it’s full. A low oil level can cause starting problems. Next, take a look at the spark plug and see if it’s fouled or damaged.

A fouled or dirty spark plug can prevent the engine from starting. If the plug looks OK, then try cleaning it with a wire brush and re-installing it. Finally, check the air filter to be sure that it’s clean.

A dirty air filter will restrict airflow to the engine and make starting difficult.


It’s not just you—dirt bikes are notoriously hard to start. If you’re new to dirt biking, you might be wondering why it’s so difficult to get your bike going. Here’s a look at some of the reasons why dirt bikes are hard to kick start, as well as some tips on how to make it a little easier.

Dirt bikes have smaller engines than street bikes, which means they require more precise timing and fuel mixture. The carburetor also needs to be regularly cleaned in order to prevent build-up that can make starting the engine more difficult. If your dirt bike has been sitting for a while, the engine may have seized up from lack of use.

This is especially common in cold weather. Be sure to check the oil level and quality before trying to start the engine, as low oil levels can cause damage. Finally, remember that it takes practice to master kick starting a dirt bike.

It’s often helpful to have someone hold the bike while you’re getting the hang of it. With some patience and perseverance, you’ll be zipping around on your dirt bike in no time!