Do Halfords Change Bike Inner Tubes

If you’re out on a ride and get a puncture, then you’ll need to change your bike’s inner tube. Here’s a quick guide on how to do it from the team at Halfords. First, you’ll need to identify which size inner tube you need for your bike.

You can usually find this information printed on the side of your current tyre. Once you have the right size, remove the wheel from your bike and deflate the tyre completely. Then, using a tyre lever (or two), prise off the tyre from the wheel rim.

Be careful not to damage either the wheel or the tyre in the process.

If you’re a cyclist, sooner or later you’re going to get a flat tire. It’s just part of the sport. And when that happens, you’re going to need to change your inner tube.

So where can you go to get that done? One option is Halfords. They offer a bike inner tube changing service at all of their stores.

Just bring in your wheel and they’ll take care of the rest. So if you find yourself with a flat tire, don’t hesitate to head on over to Halfords. They’ll have you back on the road in no time!

Do Halfords Change Bike Inner Tubes


How Much Does It Cost to Replace Bike Inner Tube?

It’s important to know how much it costs to replace a bike inner tube because this is a common repair that most cyclists will have to do at some point. The cost of the replacement tube itself is usually between $5 and $15, but there are other costs associated with this repair as well. For example, if you don’t have a spare tube with you when you get a flat, you’ll likely have to pay for a new one plus the cost of having someone put it in for you.

So, all told, expect to spend around $20-$30 to replace a bike inner tube.

How Much Does It Cost to Change a Tube?

If you’re unlucky enough to get a flat tire while cycling, don’t worry, changing a tube is relatively easy and only takes a few minutes. You’ll need some basic tools like a tire lever and a patch kit (or a new tube). Here’s a quick rundown of what you need to do:

1. First, remove the wheel from the bike. If you have quick release levers, this is easy. If not, you’ll need to use a wrench to loosen the bolts that hold the wheel in place.

2. Once the wheel is off, deflate the tire completely by pressing on the valve with your thumb (if it’s presta) or using a hand pump (if it’s schrader). 3. Use your tire lever to pry one side of the tire away from the rim. It helps to start at the valve stem.

Be careful not to scratch your rim! 4. Once one side is loose, work your way around the tire until it’s completely off the rim. Note: if your tube has a Presta valve (a small metal cap), unscrew it before removing the tube so you don’t lose it!

5. Take out the old tube and inspect it for holes or punctures. If there are any, patch them up with your patch kit according to instructions.

How Do I Get a New Inner Tube?

If you have a flat tire and need to replace your inner tube, here’s a quick guide on how to do it. First, you’ll need to remove the wheel from your bike. If you have a quick release, this is as simple as loosening the skewer.

If not, you’ll need to remove the axle nuts or bolts. Once the wheel is off, deflate the tire completely. Next, pry off the tire bead from one side of the rim using a tire lever or similar tool.

Be careful not to damage the rim or puncture the other side of the tire in the process. With one side of the bead loose, work your way around the circumference of the tire until both sides are loose. Now gently pull the tire off of the rim.

Locate any damaged areas on the old inner tube and mark them with a pen so you can avoid putting pressure on those spots when installing a new tube. Inspect both sides of your rim for sharp objects that may have caused punctures in your old tube and remove them if possible. To install your new inner tube, first inflate it slightly and then insert one end into your tire at a valve stem hole near where your wheel sits in between forks (if applicable).

Work around circumference of wheel until entire tube is inside tire then use hands to press remaining portion of bead over lip of wheel onto opposite side (may require leveraging with metal object like screwdriver handle if difficult). Re-inflate inner tube fully then re-install wheel onto bike following same process used for removal but in reverse order – make sure quick release (if present) is tight enough that when closed unable to move by hand but also not too tight as to strip threads or damage frame/fork dropouts!

How Often Should You Replace Bike Inner Tube?

Bike inner tubes should be replaced when they get punctured or damaged. Depending on how often you ride, you may need to replace them every few months to a year. If you ride regularly in rough conditions, you may need to replace them more frequently.

You can usually tell when an inner tube needs to be replaced because it will start to leak air slowly.

How to Replace a Bike Inner Tube | Halfords UK

Bike Inner Tube Replacement near Me

If you’re in need of a bike inner tube replacement, there are a few options available to you. You can either take your bike to a local bike shop or do the job yourself. If you choose to do it yourself, here’s what you’ll need:

-A new inner tube (obviously) -A tire lever (or two) -A patch kit (just in case)


No, Halfords does not change bike inner tubes. You can bring your bike into the store and they will help you select the right inner tube for your bike, but they do not offer a service to change them.