The plastics on a dirt bike are there to protect the rider and the components of the bike. They are also there to make the bike look good. There are many different types of plastics available for dirt bikes.
Some of these plastics are made by companies that specialize in making aftermarket parts for dirt bikes. These companies usually offer a wide variety of colors and styles to choose from. Other plastics are made by the manufacturers of the dirt bikes themselves.
These plastics are often not as good looking as the aftermarket ones, but they will usually be cheaper.
Acerbis Standard & Full Plastic Kits Overview
Most dirt bike plastics are made from polypropylene. This material is strong and durable, but it’s also lightweight and flexible. As a result, it’s an ideal choice for dirt bike fenders, body panels, and other parts that need to withstand tough riding conditions.
How much do these plastics cost? That depends on the brand, the specific product, and the retailer you purchase from. However, you can expect to pay anywhere from $20 to $100 for a good quality set of dirt bike plastics.
If you’re looking to save money on your purchase, be sure to shop around and compare prices before making your final decision. You may also want to consider buying used plastics; although they may not be in perfect condition, they’ll still provide adequate protection for your bike (and your wallet).
Dirt Bike Plastic Kit
Looking to add some flair to your dirt bike? A plastic kit is the way to go! There are many different designs and colors available, so you can really make your bike stand out from the crowd.
Installing a plastic kit is relatively simple, but there are a few things you need to keep in mind. First, make sure all of the hardware on your bike is in good condition and properly tightened. You don’t want any loose bolts or screws when you’re out on the trails!
Second, take your time when installing the kit. It’s not a race, and rushing could result in mismatched pieces or an overall poor fit.
Once everything is installed, enjoy showing off your new dirt bike!
Be sure to ride responsibly and always wear proper safety gear.
Credit: www.mold-tech.com
What is Dirt Bike Plastic Made Of?
Dirt bike plastic is made of a variety of materials, including polyethylene terephthalate (PET), acrylonitrile butadiene styrene (ABS), and polycarbonate (PC). Each type of plastic has its own benefits and drawbacks, so choosing the right material for a dirt bike depends on the intended use.
For example, PET is lightweight and shatter-resistant, making it ideal for body panels.
ABS is tougher and more flexible, making it suitable for fenders and other parts that need to withstand impact. PC is the strongest type of plastic, making it a good choice for frames and engine covers.
The different types of plastics used in dirt bikes can be combined to create composite materials with even greater strength and durability.
However, these composites are usually more expensive than pure plastics.
No matter what type of plastic is used, all dirt bike plastics will eventually degrade from exposure to UV light, chemicals, and extreme temperatures. This process can be slowed by using products that protect against UV rays or by storing the bike in a cool, dry place when not in use.
How Do You Restore Old Dirt Bike Plastic?
When you’re ready to tackle the task of restoring your old dirt bike plastic, there are a few things you need to keep in mind. First, you’ll need to gather all of the necessary supplies. This includes sandpaper, primer, paint, and clear coat.
You’ll also need a well-ventilated area to work in and plenty of time to devote to the project.
Once you have everything you need, the first step is to remove any existing stickers or other adornments from the plastic. Next, give the plastic a good cleaning with soap and water.
Once it’s clean, you can start sanding down any rough spots or areas that are faded. Be sure to use progressively finer grits of sandpaper until the surface is smooth.
After sanding, it’s time to apply primer.
This will help the new paint adhere better and create a more even finish. When applying primer (and paint), be sure to use light coats and allow each coat to dry completely before moving on to the next one. Depending on the type of paint you’re using, you may need to apply several coats before moving on to the clear coat stage.
The final step is applying a clear coat designed for plastics. This will help protect your newly painted surface and give it a nice shine. Again, be sure to use light coats and allow each one ample time to dry before adding another layer on top.
Restoring old dirt bike plastic can be quite a labor-intensive process but it’s definitely worth it when you see the results! With patience and some elbow grease, you can bring new life back into tired looking plastics!
What Plastics are Used in Bikes?
Plastics are an important part of bike construction. They are used in the frame, fork, handlebars, stem, wheels and tires.
The most common plastic used in bike construction is polycarbonate.
Polycarbonate is a strong, lightweight plastic that is often used in sports equipment and eyeglass lenses. It is also shatter-resistant, making it a good choice for bicycle frames and wheels.
Another common type of plastic used in bikes is acrylonitrile butadiene styrene (ABS).
ABS is a tough, impact-resistant plastic that is commonly used in car bumpers and other safety equipment. It is also used in some bike helmets.
Polyurethane (PU) is another type of plastic that is sometimes used in bike construction.
PU is a softer, more flexible material than polycarbonate or ABS. It is often used for grips, saddles and tire treads.
Can I Paint My Dirt Bike Plastics?
You can paint your dirt bike plastics, but it is not recommended. Dirt bikes are designed to be ridden hard and put away wet, so the paint will not last long. Plus, if you crash, the paint will chip and scratch easily.
Conclusion
Are you shopping for a dirt bike and wondering how much the plastics will cost? The good news is that dirt bike plastics are relatively inexpensive. A full set of plastics (including the fenders, seat, gas tank, and side panels) for a typical Japanese dirt bike will cost around $200-$300.
If you’re looking at a European or American brands, the price will be slightly higher but still in the same ballpark. So, if you’re on a budget, don’t let the cost of plastics deter you from buying the dirt bike of your dreams!