How to Change a Bike Inner Tube Youtube

If you get a flat tire while riding your bike, don’t panic! You can easily change a bike inner tube with just a few simple tools. YouTube is a great resource for finding tutorials on how to do this.

Just search for “change bike inner tube” and you’ll find plenty of helpful videos.

  • Find the hole in the inner tube
  • If the hole is on the side of the tube, it is probably caused by a thorn or piece of glass
  • If the hole is on the top or bottom of the tube, it was probably caused by a pinch flat
  • Remove the wheel from the bike and deflate the inner tube completely
  • Take out the old inner tube and inspect it for any holes or damage
  • Find the right size replacement inner tube and put some air into it before installing it onto the wheel
  • Install the new inner tube onto the wheel, being careful not to pinch or damage it in any way
  • 6 Putthe wheel back onthe bike and inflatethe tire tothe proper pressure
How to Change a Bike Inner Tube Youtube


Can You Change a Bike Inner Tube Without Removing the Wheel?

Yes, you can change a bike inner tube without removing the wheel. You will need to remove the tire from the wheel, deflate the tube, remove the valve stem cap and core, insert the new tube and inflate.

What is the Correct Way to Remove And Replace an Inner Tube?

Assuming you are talking about a bicycle tire, the first thing you want to do is remove the wheel from the bike. Once the wheel is off, use a tire lever to pry off one side of the tire. You may need to use two or three levers to get the tire completely off.

Be careful not to pinch or damage the inner tube while removing the tire. Once the tire is off, take out the old inner tube and inspect it for any holes or punctures. If there are any, use a patch kit to repair them.

Once your tube is patched up (or if it didn’t need patching), inflate it slightly and insert it into the tire. Start at one end of the tire and work your way around, making sure that the tube isn’t pinched anywhere as you go. Once the tube is in place, put the Tire back on by reversing what you did when taking it off.

. Again, be careful not to pinch or damage The Tube. Inflate The Tire To The Appropriate PSI And Reattach The Wheel To The Bike frame.

You’re now ready to ride!

Is Changing a Bike Tube Easy?

If you’re new to biking, changing a bike tube can seem daunting. But with a little practice, it’s actually quite easy! Here’s a step-by-step guide to changing a bike tube:

1. Remove the wheel from your bike. This is usually done by loosening the axle nuts or quick release lever. Consult your bike’s manual if you’re unsure how to do this.

2. Once the wheel is off, use your hands to locate the punctured tube. You’ll be able to feel where the air has escaped. 3. Use a tire lever (or two!) to pry the tire off of the rim.

Be careful not to damage the tire or rim in the process. 4. Take out the old tube and inspect it for any sharp objects that may have caused the puncture. If everything looks clear, proceed to Step 5. If you find anything, remove it and patch up the hole in the old tube before proceeding (see below).

5. Inflate your new tube slightly and fit it into the tire so that it lines up with all of the holes in the rim . It helps to put a little bit of baby powder onthe inside ofthe tireto help with this process . Make sure thatthe valve stemis pointing inwards towardsthe centerof th e wheel .

Otherwise ,you won’t be ableto inflateyour tir elater on! Also make surethat there aren’tany twistsin therubber tubingas thiswill also preventproper inflation lateron . Onceeverythinglooks good , startto workthetire backovertherim usingyourhandsand/ortire levers .

6 Again ,make surethat therearen’tany twistsin therubberbeforeputtingeverythingback together ! Otherwise ,you’ll justhave anotherflat shortly thereafter 7 Puttherim backonth ewheelandtightenupeitherth eaxle nutsorthequickreleaselever(dependingon whattypeofwheelyou have) 8 Inflateyourtireto itsrecommendedpsi level(usuallyaround60-80psi formostroadbikes) 9 Reattachyourwheel toyourbikeandyou’regoodto go ! 10 Althoughitmayseemdauntingat first ,changinga biketubeisactuallyquiteeasyonceyou getthehangofit!

How Do You Change a Bike Tube Without Pinching It?

There are a few things you need to know before changing a bike tube without pinching it. First, you’ll need to identify the location of the puncture. Once you’ve found the hole, it’s important to clean and dry the area around it.

This will help ensure that your patch will adhere properly. Next, use a utility knife or scissors to cut away any damaged rubber around the hole. Be sure not to cut into the good part of the tire.

Now you’re ready to apply your patch. There are two types of patches – self-adhesive and vulcanizing. If you’re using a self-adhesive patch, simply peel off the backing and press it into place over the hole.

For a vulcanizing patch, you’ll need to apply some adhesive first (following the manufacturer’s instructions). Once your patch is in place, give it 24 hours to cure before riding on it.

How To Change A Bicycle Inner Tube

Change Inner Tube Without Removing Wheel

If you get a flat tire while riding, it’s important to know how to change an inner tube without removing the wheel. This can be a tricky process, but with a little practice it’s something that anyone can do. Here are the steps:

1. First, remove the wheel from the bike. You’ll need to loosen the bolts or quick release lever that hold the wheel in place. 2. Once the wheel is off, take out the old inner tube.

You’ll need to deflate it first by pressing down on the valve stem. Then, use a tire lever to pry one side of the tire away from the rim so you can access the tube. Pull it out and discard it.

3. Now it’s time to install the new inner tube. Start by inflating it slightly so that it’s easier to work with. Then, fit one end of the tube into place inside the tire and work your way around until it’s fully seated.


Have you ever gotten a flat tire while riding your bike? If so, then you know how frustrating it can be. But don’t worry, changing a bike inner tube is not as difficult as it may seem.

With a little bit of know-how and the right tools, you can have your bike up and running in no time. To start, you’ll need to remove the wheel from your bike. Once the wheel is off, take a look at the inner tube.

You’ll notice that there are two valves – one for inflating and one for deflating. The valve stem is located on the outside of the tire. To remove the inner tube, simply unscrew the cap from the valve stem and let all of the air out.

Next, use a tire lever to pry the edge of the tire away from the rim. Work your way around the entire tire until it is completely removed fromthe rim. Oncethe tireis off, take a look atthe inside ofthe rim to see ifthere are anysharp objects thatmay have puncturedthe innertube (suchas glass ora nail).

Ifyou find anything, be sure toremove itbefore proceeding. Now it’s time to put ona newinnertube. Start byinflatingit slightly so thatit takes shape, but don’t fill itup alltheway just yet.

Next, fitone endof th enewtube overone sideofthevalve stemand workyour wayarounduntilit’s inplace(You mayneedto usetheleveragainto help getit started).Once both endsare inplace, goaheadandinflateittothe properpressure(youcan usuallyfindthis informationontherim). Finally ,puttherim backonthewheeland screwonth e capsoittightlyin place .

Andthat’sallthereis tooitchanging abikeinner tube!