How to Change Bike Brakes from Eu to Uk

There are two types of brakes used on bicycles in the UK, “EU” and “UK”. EU brakes have a longer reach than UK brakes, so they need to be adjusted when changing from one type to the other. This can be done at home with a few tools.

You will need: -A screwdriver -An adjustable wrench

-A bike stand (optional) First, loosen the brake cable by unscrewing the barrel adjuster all the way. Next, use the wrench to loosen the nut that secures the brake caliper to the frame.

Once this is done, you can remove the wheel and take off the old brake pads. To install new pads, simply reverse these steps. When putting on new pads, make sure that they are aligned correctly before tightening everything back up.

  • Check your bike to see if it has Eu or Uk brakes
  • If your bike has Eu brakes, you will need to replace the brake pads with Uk ones
  • To do this, first remove the old brake pads from the bike
  • Next, insert the new brake pads into place
  • Make sure they are tight and secure before continuing
  • Finally, test out the brakes to make sure they are working properly
How to Change Bike Brakes from Eu to Uk


Why are Bike Brakes Different in the Uk?

Bike brakes in the UK are different from those in other countries because of the way they are regulated. In the UK, bike brakes must be tested and approved by the British Standards Institute (BSI). This means that they have to meet certain safety standards before they can be sold.

The BSI tests bike brakes for their stopping power, durability and reliability. They also test how well they work in wet weather conditions. This is important, as many cyclists ride in all weathers and need to know that their brakes will work well even when it’s raining.

There are two main types of bike brake available in the UK: rim brakes and disc brakes. Rim brakes are the most common type – they work by pressing two pads against the wheel’s rim, which slows down the wheel. Disc brakes work in a similar way, but instead of pads pressing against the rim, they have a disc that sits behind the wheel and is slowed down by calipers (pieces of metal that squeeze together).

Disc brakes tend to be more expensive than rim brakes, but they offer better braking performance, especially in wet weather conditions. This is because water can build up on rim brake pads and reduce their effectiveness. Disc brake pads also last longer than rim brake pads, so you won’t need to replace them as often.

Is It Illegal to Bike Without Brakes Uk?

There is no law in the UK stating that you must have brakes on your bike, however it is recommended. Brakes are an important safety feature on a bike, and riding without them could be considered dangerous. If you were to get into an accident while riding without brakes, you could be held liable for any damages or injuries caused.

Are Bike Brakes Interchangeable?

Most bike brakes are not interchangeable because they are specific to the type of bike you have. For example, mountain bikes typically have disc brakes while road bikes usually have rim brakes. However, there are some exceptions where certain brake types can be used on more than one type of bike.

Disc brakes are the most common type of brake found on mountain bikes. These work by stopping the wheel from spinning by pressing two pads against a metal disc that is attached to the wheel hub. Disc brakes are very powerful and offer good braking performance in all weather conditions.

Rim brakes, on the other hand, are the most common type of brake found on road bikes. They work by pressing two pads against the sides of the wheel rims which slows down the rotation of the wheels. Rim brakes tend to be less powerful than disc brakes but they are lighter weight and require less maintenance.

So, while most bike brakes are not interchangeable, there are some cases where you may be able to use a different type of brake on your bike depending on what kind it is and what you need it for. Always consult your owner’s manual or a professional bicycle mechanic before making any changes to your bike’s braking system.

Which Side is the Back Brake on a Bike?

There is no definitive answer to this question as it depends on the type of bike you are riding. However, generally speaking, the back brake is on the right side of the bike. This is because most people are right-handed and therefore find it easier to reach the back brake with their right hand.

How To Swap Hydraulic Brake Hoses | MTB Maintenance

Switch Front And Rear Brakes

We all know that it’s important to keep our brakes in good working order. But did you know that you can improve your braking performance by switching the front and rear brakes? Here’s how it works: when you switch your front and rear brakes, the front brake caliper moves to the rear of the bike and the rear brake caliper moves to the front.

This change puts more weight over the front wheel, which provides better braking power and stability. So if you’re looking to improve your braking performance, give this method a try!


If you’re looking to change your bike brakes from Eu to UK, there are a few things you need to know. First, make sure you have the right tools for the job. You’ll need a Phillips screwdriver and an adjustable wrench.

Next, remove the wheel from your bike and unscrew the brake pads. Once the pads are removed, unscrew the caliper from the frame of your bike. Finally, reattach the caliper to the frame and screw on new brake pads.