Most road bikes will have a few pre-drilled holes in the frame where a water bottle cage can be attached. If your bike does not have these holes, you can still install a cage using zip ties. First, find a spot on the frame where you want to attach the cage.
It is important to make sure that the cage will not interfere with any moving parts or cables on the bike. Once you have found the perfect spot, use a tape measure to determine how long your zip ties need to be. Cut 4 zip ties to this length and thread them through the holes on the bottle cage.
Next, loop each zip tie around the frame and pull tight. Finally, trim off any excess plastic and tuck in any sharp ends.
- Make sure that your bike is in the correct position
- You will need to be able to access the bolts that hold the bottle cage in place
- If your bike has a water bottle holder, remove it before proceeding
- Take a look at the underside of the bottle cage and find the two bolts that hold it in place
- Unscrew these bolts using an Allen key or a Phillips head screwdriver, depending on what type of screws are being used
- Insert the new bottle cage into place and screw in the bolts tightly to secure it
- Make sure that the cage is positioned correctly so that your water bottle will fit snugly into it when you replace it
- Test out your new water bottle cage by inserting a water bottle into it and seeing if it stays securely in place while you ride your bike
How to Install Bottle Cage on Bike
If you’re looking to add a bottle cage to your bike, there are a few things you’ll need to do. First, you’ll need to find a spot on your bike frame that’s big enough to accommodate the cage. Once you’ve found the right spot, use a drill to make two pilot holes in the frame.
Next, use screws and bolts to attach the cage firmly in place. And that’s it! Now you can easily access water while you’re riding.

Credit: www.purecycles.com
How Do You Attach a Bottle Cage to a Bike?
Most bottle cages will have two holes near the top. These are where the screws or bolts attach the cage to your bike frame. There are also some designs that only have one hole.
In this case, the cage is meant to slide over a existing bar on your frame and then be secured with a single screw or bolt.
To attach your bottle cage, first make sure you have the correct screws or bolts. If you’re not sure, consult your bike’s owner’s manual.
Once you have the correct hardware, simply line up the holes on the cage with the appropriate threaded holes on your frame and insert the screws or bolts. Tighten them until they’re snug, but don’t over-tighten as this could strip the threads or damage your frame.
That’s it!
Your bottle cage is now securely attached to your bike and ready for action.
How Do I Put a Water Bottle Cage on My Bike Without Holes?
If you don’t have water bottle cage holes on your bike frame, there are a few ways to mount a cage. You can use zip ties, velcro straps, or even tape.
Zip ties are the most common way to mount a water bottle cage without holes.
Just thread the zip tie through the cage and around the frame tube. Then cinch it tight and trim off the excess.
Velcro straps are another option, and they’re especially handy if you need to remove the cage frequently (like when packing up your bike for travel).
Just loop the strap around the frame tube and Velcro it in place.
Tape is probably the least secure option, but it’s also quick and easy. If you go this route, be sure to use a strong adhesive tape like duct tape.
Wrap it around both the frame tube and water bottle cage several times for added security.
Do All Bikes Have Holes for Water Bottle Holder?
No, not all bikes have holes for water bottle holders. Some bike frames are not designed with this feature, while others may have aftermarket options available. If your bike does not have built-in water bottle holders, there are a few ways to add them on.
You can purchase an aftermarket cage that attaches to your frame or look for a seat post mounted option. There are also some handlebar mounted designs available. Ultimately, it is up to you to decide which route is best for your bike and riding style.
How Tight Should a Bottle Cage Be?
How tight should a bottle cage be?
This is a question that gets asked quite often, and unfortunately, there is no single answer that will work for everyone. It really depends on a few factors, such as the size and shape of your frame, the type of bottle cage you are using, and even the type of bottles you are using.
Here are a few general tips to help you get started:
1. Make sure that your frame has enough clearance for the bottle cage. If it is too close to the frame, it could rub and damage your paint job.
2. Use a bottle cage that is designed for your specific bike frame. This will ensure a snug fit and prevent rattling.
3. Use rubber O-rings or velcro straps to secure the bottom of the cage to your frame.
This will keep it from bouncing around when you ride over rough terrain.
4. Experiment with different types of bottles until you find one that fits securely in the cage without falling out. Some people prefer smaller bottles for road biking, while others prefer larger ones for mountain biking.
Ultimately, it’s up to you to decide what works best for you!
How To Install Bicycle Bottle Cages | Road Bike Basics
Conclusion
The article provides a step-by-step guide on how to install a bottle cage on a road bike. It starts by explaining what a bottle cage is and why it is important to have one. It then goes on to show how to properly position the cage and attach it to the bike frame.
The article includes photos and illustrations to help make the instructions clear. Finally, it offers some tips on troubleshooting common problems that can occur when installing a bottle cage.